Instructions: Wash and dry fabrics before painting to minimize fading.
Spray a small inconspicuous area of your fabric to see the end result before continuing project. Instructions for use:
Choose stencil and spray back of stencil lightly with spray glue.
Cover areas that you do not want paint to show through with tape or paper.
Protect work area.
Shake well before using. Tear off safety tab. Hold can 6 to 8 inches away from project.
IMPORTANT: Begin spraying off project and end off project. Maintain even pressure on trigger, do not pump.
In a slow circular motion, spray over stencil.
Repeat spraying if needed for desired colour.
Remove stencil from fabric by slowly pulling from one corner to the other.
Instead of stencils, you can use masking tape, paper cutouts, or foam pieces as a resist.
Instructions for cleaning nozzle:
Clean tip of nozzle between each use.
Rinse under warm water or tip can upside down and spray to clear nozzle.
Let dry approximately one hour.
For long-term storage, store upside-down in a bowl of water.
Instructions for machine washing finished projects:
Wait 72 hours to wash, no need to heat set. Do not iron.
Do not use fabric softener, tumble dry on low, turn inside out.
WASHES OFF HANDS WITH SOAP AND WATER.